- Pipe Size (inch)
- 10 -14
- Minimal cutter rotation
- Wall thickness
- Wholesale Manual Pipe Cutter for 10 Inch to 14 Inch Steel Pipe Cutting (H14S ) Manufacture
The low profile design of H14S manual pipe cutter needs only 5 inch (127 mm) clearance for up to14 inch pipe diameter.
Safe, clean, straight cuts are easy with these manual-operated cutters.
Cold cut large diameter steel, stainless steel pipe in close quarters.
H14S cutter is supplied with a slip-on handle that is used to turn and tighten the cutter.
With good leverage from the tool’s long handle, pipe snaps off squarely before the cutter wheels penetrate halfway through the pipe.
Provides a square cut and can be used in close quarters anywhere – in the ditch,underwater,
in noise-free zones, over head, in racks of pipes, etc.
H14S manual pipe cutter operates with minimal cutter rotation (45 degree).Suitable to cut steel pipe, cast iron Pipe, galvanized pipe, ductile iron pipe and black iron pipe, stainless steel pipe.
- Cold cutting: no spark， no big heat
- Environmentally friendly: no debris when cutting process
- Use for the already installed pipe fittings.
- Squeezing cutting with better working performance
- Cutting blade is interchangeable with Reed.
- For Black Pipe
- For Cast Iron Pipe
- For Galvanized Pipe
- For Steel Pipe
- For Stainless Steel Pipe
- Item Model: H14S
- For steel pipe : 10"-14"
- For steel pipe (wall thickness): 4.19mm-11.1mm
- For cast iron pipe:10"-12"
- For cast iron pipe (wall thickness): 4.19mm-6.0mm
- For stainless steel pipe : 10"-12"
- For stainless steel pipe (wall thickness): 4.19mm-6.0mm
|Catalog No.||Model No||Description||capacity||N.W||G.W||Packing(cm)||Package|
|311204||H14S||manual pipe cutter||10"-14"||23.0 kgs||32.0 kgs||118*36*16.5||1 pcs/plywood case|
|Catalog No.||Model No.||Description||N.W(kg)|